View KWT722_4650088.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Specification KWT722
SSC
Drawn Approval
CUSTOMER
Approval
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
CONTENTS
1. Feature & Application 2. Absolute Maximum Ratings 3. Electro Characteristics 4. Optical characteristics 5. Color & Binning 6. Rank of KWT722 7. Outline Dimension 8. Packing 9. Soldering 10. Precaution for use 11. Reliability Test Item and Condition
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
KWT722
Description This surface-mount LED comes in PLCC standard package dimension. It has a substrate made up of a molded plastic reflector sitting on top of a bent lead frame. The die is attached within the reflector cavity and the cavity is encapsulated by epoxy or silicone. The package design coupled with careful selection of component materials allow these products to perform with high reliability in a larger temperature range -40 to 100. The high reliability feature is crucial to Automotive interior and Indoor ESS.
*
KWT722
Features
White colored SMT package. * * * Material : InGaN/SiC Encapsulating Resin : Epoxy Resin Suitable for all SMT assembly methods ; Suitable for all soldering methods * RoHS Compliant
Applications
* * Interior automotive Office Automation, Electrical Appliances, Industrial Equipment * Lightings
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
2. Absolute maximum ratings
Parameter Power Dissipation Forward Current Peak Forward Current Reverse Voltage (per die) Operating Temperature Storage Temperature Symbol Pd IF IFM
*2
Value 350 90 270 5 -30 ~ +85 -40 ~ +100
Unit mW mA mA V C C
VR Topr Tstg
*1 Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product. *2 IFM was measured at TW 1msec of pulse width and D 1/10 of duty ratio.
3. Electric & Optical characteristics
Parameter Forward Voltage (per die) Reverse Current (per die) Luminance Intensity *1 Luminance Flux Color Temperature Color Coordinate Viewing Angle *2 Optical Efficiency Symbol VF IR IV V CCT X Y 21/2 Condition
IF =20 mA VR=5V IF =60 mA IF =60 mA IF =60 mA IF =60 mA IF =60 mA IF =60 mA
Min 2.7 3000 4800 -
Typ 3.2 4800 13 0.31 0.31 120 68
Max 3.7 50 6000 12000 -
Unit V A mcd lm K deg lm/W
op
*1. The luminous intensity IV was measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. Luminous Intensity Measurement allowance is 10% *2. 21/2 is the off-axis where the luminous intensity is 1/2 of the peak intensity. [Note] All measurements were made under the standardized environment of SSC.
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Forward Current IF[mA]
Relative intensity[%]
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
4. Optical characteristics
Forward Current vs. Forward Voltage (per die)
(Ta=25 OC )
10
1 2.0
2.5
3.0
3.5
4.0
Forward Voltage VF[V]
Relative Luminous Intensity vs Forward Current
300
(Ta=25 OC )
250
200
150
100
50
0
0
30
60
90
120
150
180
210
240
Forward Current IF [mA]
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Forward current IF (mA)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
4. Optical characteristics
Ambient Temperature vs. Allowable Forward Current (per die)
35 30 25 20 15 10 5 0
-25
0
25
50
O
75
100
Ambient temperature Ta( C)
Radiation Diagram
0 -30 30
(Ta=25 OC )
-60
60
-90
90
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Normalized Intensity
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
4. Optical characteristics
Spectrum
1.0
(TA=25, IF=60mA)
0.8
0.6
0.4
0.2
0.0
400
500
600
700
Wavelength(nm)
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
CIE (y)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
5. Color & Binning
0.9 0.8 0.7
505 515 510 520 525 530 535
540
545
550 555 560 565 570 575 580 585 590 595 600 610 620 630 830
0.6
500
0.5 0.4 0.3 0.2 0.1 0.0 0.0
495
490 485 480 475 470 460
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
CI E(x)
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Y
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
X 0.285 0.292 0.286 0.278 X 0.32 0.33 0.33 0.318
5. Color & Binning
0.40 0.38 0.36
5600K 7000K
g2 f2
4600K
0.34 0.32
e2 d2 e1
6200K
f1
5000K
10000K
0.30 0.28 0.26 0.26 0.28
c2 b2 b1 a1 c1
d1
a2
8200K
0.30 0.32 0.34 0.36
12000K
COLOR RANK
a1 Y 0.259 0.27 0.282 0.271 c1 X 0.3 0.31 0.3065 0.295 e1 Y 0.281 0.2935 0.3104 0.295 Y 0.306 0.318 0.338 0.325 X 0.318 0.33 0.33 0.316 X 0.295 0.3065 0.303 0.289 e2 Y 0.325 0.338 0.358 0.343 X 0.278 0.286 0.279 0.271 c2 Y 0.295 0.3104 0.329 0.312 f1 X 0.33 0.344 0.345 0.33 a2 Y 0.271 0.282 0.297 0.284
X
X 0.292 0.3 0.295 0.286 d1 X 0.31 0.32 0.318 0.3065 Y 0.318 0.335 0.353 0.338 Y 0.2935 0.306 0.325 0.3104 f2 X 0.33 0.345 0.346 0.33

b1 Y 0.27 0.281 0.295 0.282 X 0.3065 0.318 0.316 0.303 Y 0.338 0.353 0.374 0.358 X 0.346 0.36 0.3578 0.345 X 0.286 0.295 0.289 0.279 d2 Y 0.3104 0.325 0.343 0.329 g2 Y 0.3745 0.389 0.36 0.353 b2 Y 0.282 0.295 0.312 0.297
* Measurement Uncertainty of the Color Coordinates : 0.01
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
6. rank of KWT722
Rank Name Table X1 VF X2 IV X3 CIE
Forward Voltage [V] Rank Name Y Z Z1 A MIN 2.9 3.1 3.2 3.3 MAX 3.1 3.2 3.3 3.5
Luminous Intensity [mcd] Rank Name R S MIN 3000 4000 MAX 4000 6000
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
7.outline dimension
Package Outlines
6
5
4
Package Marking (Cathode)
Front View
1
2
3
Right View
Rear View
( Tolerance: 0.2, Unit: mm )
Circuit Diagram
Recommended Solder Pad
White Anode
6 5 4
W1
1
W2
2
W3
3
White Cathode
* MATERIALS PARTS Package Encapsulating Resin Electrodes MATERIALS Heat-Resistant Polymer Epoxy Resin Ag Plating Copper Alloy
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
8. packing
Package Marking
( Tolerance: 0.2, Unit: mm )
1)Quantity : 700pcs/Reel 2)Cumulative Tolerance : Cumulative Tolerance/10 pitches to be 0.2mm 3)Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at the angle of 10 to the carrier tape 4)Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
Reel Packing Structure
Reel
QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER :
SEOUL SEMICONDUCTOR CO., LTD.
HUMIDITY INDICATOR DESI PAK
Aluminum Vinyl Bag
QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER :
SEOUL SEMICONDUCTOR CO., LTD.
Outer Box Structure
Material : Paper(SW3B(B)) TYPE SIZE (mm) c a b 245 220 102 7inch 245 220 142
1 SIDE c
TUV
MADE IN KOREA
QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER :
SEOUL SEMICONDUCTOR CO., LTD.
Acriche
RoHS
1
Semiconductor EcoLight
b a
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
9. soldering
(1) Lead Solder
Lead Solder
Lead Solder Pre-heat Pre-heat time Peak-Temperature Soldering time Condition 120~150 120 sec. Max. 240 Max. 10 sec. Max.
2.5~5 C / sec.
2.5~5 o C / sec. Pre-heating 120~150 oC
240 oC Max. 10 sec. Max. 60sec. Max. Above 200 oC
120sec. Max.
(2) Lead-Free Solder
Lead-frame Solder
Lead Free Solder Pre-heat Pre-heat time Peak-Temperature Soldering time Condition 150~200 120 sec. Max. 260 Max. 10 sec. Max.
1~5 o C / sec.
1~5 o C / sec. Pre-heating 150~200 o C
260 oC Max. 10 sec. Max. 60sec. Max. Above 220 oC
120sec. Max.
(3) Hand Soldering conditions Do not exceed 4 seconds at maximum 315C under soldering iron. (4) Reflow soldering should not be done more than three times.
Note : In case that the soldered products are reused in soldering process, we don't guarantee the products.
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
10. precaution for use
(1) Storage In order to avoid the absorption of moisture, it is recommended to store in a dry box (or a desiccator) with a desiccant. Otherwise, to store them in the following environment is recommended. Temperature : 5C ~30C Humidity : maximum 65%RH (2) Attention after open. LED is correspond to SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed; a. After opened and mounted the soldering shall be quickly. b. Keeping of a fraction Temperature : 5 ~ 40C Humidity : less than 10% (3) In the case of more than 1 week passed after opening or change color of indicator on desiccant, components shall be dried 10-12hr. at 605C. (4) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temperature after soldering. (5) Quick cooling shall be avoided. (6) Components shall not be mounted on warped direction of PCB. (7) Anti radioactive ray design is not considered for the products. (8) This device should not be used in any type of fluid such as water, oil, organic solvent etc. When washing is required, IPA should be used. (9) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (10) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (11) The LEDs must be soldered within seven days after opening the moisture-proof packing. (12) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (13) The appearance and specifications of the product may be modified for improvement without notice.
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)
Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet
11. Reliability Test Item and Condition
Item Thermal Shock Temperature Cycle Reference EIAJ ED-4701 EIAJ ED-4701 Test Condition Ta =-40oC (30MIN) ~ 100oC (30MIN) Ta =-40oC (30MIN) ~ 25oC (5MIN) ~ 100oC (30MIN) ~ 25oC (5MIN) Ta =100oC Ta =85oC, RH=85% Ta =-40oC Ta =25oC, IF =20mA Ta =85oC, RH=85%, IF =15mA Ta =85oC, IF =20mA Ta =-40oC, IF =20mA 1KV at 1.5k; 100pF Duration / Cycle 100 Cycle 100 Cycle 1000 Hours 1000 Hours 1000 Hours 1000 Hours 300 Hours 500 Hours 1000 Hours 3 Time Number of Damage 0/22 0/22 0/22 0/22 0/22 0/22 0/22 0/22 0/22 0/22
High Temperature EIAJ ED-4701 Storage High Temperature High Humidity EIAJ ED-4701 Storage Low Temperature EIAJ ED-4701 Storage Operating Endurance Test High Temperature High Humidity Life Test High Temperature Life Test Low Temperature Life Test ESD(HBM) Internal Reference Internal Reference Internal Reference Internal Reference MIL-STD883D
Criteria for Judging the Damage
Item Forward Voltage Reverse Current Luminous Intensity Symbol VF IR IV Condition IF =20mA VR=5V IF =20mA Criteria for Judgement MIN LSL*2 x 0.5 MAX USL*1 x 1.2 USL*1 x 2.0 -
Note : *1 USL : Upper Standard Level *2 LSL : Lower Standard Level
Rev. 00 November 2007 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00)

▲Up To Search▲

Price & Availability of KWT722

	To Download KWT722 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .